X
Dealer Engine Prep
Validates warranty. Includes filling oil, completing a full OEM checklist, test run in tank, drain fluids, quart/s of oil added to crate, recrating. Assures a working engine.
Pre-Delivery Inspection
Standard Fee for services performed & products used on each new vessel, requested by all manufacturers to validate and assist in all warranties.
We install a deep cycle marine battery, fully rig steering components, complete electrical and systems check. We conduct a full system check on the motor, fill with oil, fluids, and fuel, then test run in a test tank.
Once everything is tuned and prepared, a sea trial is performed with two Specialists to achieve ideal RPM-to-top-speed ratio, ensuring the boat gets on plane properly, and all systems operate on water.
Afterwards a full detail is performed on the tubes, deck, and hull to be turn-key ready for the customer.
CA DMV Registration
We will take care of your CA DMV registration for the vessel, which includes signing a Power of Attorney for the registration. We will email over a Power of Attorney to be signed and sent back. Once we have that, we mail out the temporary pink slip and stickers.
NOT ACTUAL COLOR SCHEME.
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
AB Jet Series | ABJET 330 2021 with Rotax Jet Propulsion - Black
The AB Jet S Series has become the benchmark in the 9.5ft (2.90mts) to 12ft (3.86mts) jet segment. The AB Jet S Series is designed to comfortably seat two people at the pilot's seat, offering the most efficient passenger capacity in its segment. With a flat floor deck free of obstructions, an ergonomically positioned throttle, a sport console with cupholders, a convenient platform with a stainless-steel sliding ladder, stainless-steel handles and rails, provide a seamless experience on the water.
Boat Specifications
- LOA: 10' 10"
- Beam: 5' 8"
- Weight: 771 lbs (Includes Rotax Engine)
- Capacity: 5 persons
- Max Motor: 100 hp
- Tube Diameter: 16"
- Air Chambers: 4
- Fuel Tank: 10 gals
- Fabric Type: Hypalon
- Factory Warranty: 10 years
Standard Features
- Integrated marine aluminum fuel tank (10 gals)
- Non-skid deck, integrated bow locker
- Stainless hand rails, stainless bow eye
- (4) stainless davit lifting points
- Stainless ski eye
- Stainless transom tie downs,
- (2) Stainless folding cleats,
- Stainless drain plugs,
- Self bailing deck with non-return valves
- (2) Recessed cup holders
- Fire extinguisher
- Bilge pump
- Removable LED navigation lights
- Battery switch
- Engine compartment blower
- Sport steering wheel
- Control panel with fuel gauge
- Under-platform sliding boarding ladder
- Hand pump
- Maintenance kit
- Owner's manual
Motor Specifications
- Engine Type: Rotax 4-TEC 150 ECT Four Stroke
- Horsepower: 100 hp
- Cylinders: 3 cyl
- Steering: Remote mech
- Starter: Electric
- Weight: (Included in Boat Weight)
- Displacement: 1,494 cc
- Induction System: EFI
Standard Features
- Muffler
- Silencer
- Catalytic exhaust system
No one has reviewed this product!
Write a Review
